A two-pack, solvent-free epoxy resin primer designed to improve the adhesion of paint coatings to difficult substrates.
It can be applied to powerfloated concrete, quarry tiles, ceramic tiles, stainless steel and aluminium to aid the adhesion of subsequent coatings. Overcoat with Anglo Epoxy Floor paint, Anglo Treadsafe or any other solvent free Anglo epoxy resin coating (other types of coating should be tested first).
Please note: Although Anglo Powerfloat Epoxy Sealer will improve adhesion on difficult surfaces the characteristics of such surfaces can vary. For this reason a trial area should be applied to ensure that adequate adhesion can be achieved. This also applies to surfaces which are difficult to clean, such as tiles in bare foot areas.
Anglo Powerfloat Epoxy Sealer is intended as a primer only, not a wearing surface.
Usage rate: Up to 30m2 per 5 litres per coat (one coat normally required).